System Clear Coat 810 MS 
Clear Coat

Description

Medium solid, two-component acrylic top coat on the basis of resistant acrylic resin of own production. It is used for partial and full repair of cars and commercial vehicles. Clear coat perfectly fills the pores and small scratches, has a good luster and provides a stable coating. Fast drying and hardening makes it possible to save time and material at all stages of repair.

Suitable for applying surface

• Polyuethane and acryl top coats, metallic base

  Mixing proportions
  

  • CS System Clear Coat 810 MS - 100
  • hardener "CS System Hardener 810 MS" or "CS System Hardener - 815 MS" - 50 
  • Thinner "CS System Thinner - 405" or "CS System Thinner-410" or "CS System Thinner - 415" from 0 to 20 

Cautions:

•  
• applied after drying the base enamel
• equipment and tools for the application must not have any trace of water.
• Clear Coat can not apply when the relative humidity of the air HIGH than 80%.

• Terms of use:

  
  

  Autoluck - 100 Hardener - 50 Solvent - 20	Mix up	14 - 15 seconds at +20 º C B3 - 4	1,3 - 1,5 mm 3 - 4 bar 2 - 3 layers of 40 - 50 microns	10 - 15 min at 20 º C	6:00 / +20 º C 45 min / +60 º C

  Density	1 kg / l at +20 ° C
  Solids content in the mixture of paint and a hardener (A + B)	at least 42%
  Pot life	Equally 7 h.
  Consumption	1 liter of undiluted paint on the 9th 2 with dry film thickness 50 mm
  Packaging	1L, 5L
  Shelf	In original sealed packaging 24 months at temperatures between +5 º C to +30 º C and relative humidity up to 80%   Producer is not responsible for the poor quality coatings in the case of the species we are not recommended hardeners and solvents.