Print

CS System Clear Coat 850 UHS
Clear Coat

Description

Ultra high solid, two-component acrylic top coat. It belongs to a two-component acrylic system. It is characterized a short polymerization time, excellent circulation and high transparency and luster. It is resistant to oil, gasoline and atmospheric influences, which helps to the surface. The increased hardness of the coating contributes to an increase in the life of coating.

Suitable for applying surface

Polyuethane and acryl top coats, metallic base

Mixing proportions:

CS Systen Clear Coat 850 UHS" - 100
Hardener "CS System Hardener 850 HS" or "CS System Hardener 855 HS" - 50
Thinner "CS System Thinner 405" or "CS System Thinner 410" , or "CS System Thinner 415" 0 to 35

Cautions:

equipment and tools for the application must not have any trace of water.
Autoluck not apply when the relative humidity of the air is not higher than 80%.

Autoluck - 100
Hardener - 50
Solvent - 0 ÷ 35

Mix up

14 - 15 seconds
at +20 º C
B3 - 4

1,3 - 1,5 mm
3 - 4 bar
1 - 1.5 layer of
45 - 55 mm

10 - 15 min
at 20 º C

10:00 / +20 º C
60 min / +60 º C

Density	1,05-1,10 kg/l at +20°C
Solids content in the mixture of paint and a hardener (A+B)	60-65%
Pot life	not less than 6 h.
Consumption	1 l per 10,5 m2 with dry film thickness 50 mm
Pachaging	1 l, 5 l
Shelf	In original sealed packaging 24 months at temperatures between +5 º C to +30 º C and relative humidity up to 80% Producer is not responsible for the poor quality coatings in the case of the species we are not recommended hardeners and solvents