Thermospray plastic for thin-layerline marking with anti-skid effect

PROPERTIES	Thermospray plastic is thermo softening material in the form of granular mixture of polymeric binder, mineral fillers, pigments, plasticizers, functional additivesm forming after heating, blending and cooling, the solid coating.
AREA OF APPLICATION	It has been designed for permanent road markingon highways and streets covered with asphalt andconcrete with service life more than four years.
APPLICATION CONDITIONS	It is applied with specialized marking machines through nozzles under high pressure at the material temperature between +180°С and 210°С.
CONSUMPTION	between 1-2,1 kg/m2 at a layer thickness of 0,6-1,1 mm
CHARACTERISTICS	Mechanically resilient, flexible, 100% adhesion to surface, free of solvents, UV, IR- resistant, fast curing, alkali-resistant, freeze resistant
COLOR	White, yellow
DENSITY	within 1,4-1,6 g/cm3
SOLIDS CONTENT	100%
HARDENING TIME	up to 10 minutes at +20°С
APPLICATION METHOD	Before applying remove the traces of the previousmarking. Surface must be clean, dry, free of dust, earth,mud, salt, oil and other dirt. On the concrete, apply aprimer Signakul PCP 01. Application temperature should be between 180°С anf +210°С. Environmental temperature at application must be between +5°С and +35°С. Substrate temperature must not be below 0°С and over +40°С. Environmental temperature at application must be Relative humidity must not exceed 85%.
PACKAGING	Plastic bag -25 kg
STORAGE	12 months if it is kept at a temperature of not higher than +30°С in originalsealed packaking, avoiding direct sunlight.
SAFETY	When handling it is necessary to strictly follow safety procedures and fire protection measures which are contained in the standards and technical documentation of the product.