CS System Filler 5+1 НS

CS System Filler 5+1 НS
Acrylic primer

Description

Two-component high quality filler on the basis of resistant hydroxyl-acrylic resins of 2K-acrylic system of own production. It is high solid (HS) material, which ensures perfect filling properties. It fills scratches and porosity. Thanks to fine pouring its application provides very smooth and plain surface that minimizes subsequent sanding.

Suitable for applying surface

old paint;
steel;
phosphating primer;
anti-rust primer;
polyester putty

Cautions:
minimum temperature of +15 ° C
equipment and tools must not have any trace of water. The relative humidity of the air is not higher than 80%.
Thinner: "CS System Thinner 410".

Stir all ingredients to a uniform consistency, respecting the mixing proportions. Apply with a gun layers of 30 - 40 microns with an exposure between layers of 8 - 10 minutes.


Primer - 100 Hardener - 20 Solvent - from 10 to 20	22 - 26 seconds at +20 º C B3 - 4	1,6 - 2,0 mm 3 - 4 bar 2 layers of 100 - 120 mm	8 - 10 min at 20 º C	4 h+20 º C 45 min / +60 º C	R 320 - R 400	R 600 - R 1,000

Primer - 100
Hardener - 20
Solvent -
from 10 to 20

22 - 26 seconds
at +20 º C
B3 - 4

1,6 - 2,0 mm
3 - 4 bar
2 layers of
100 - 120 mm

8 - 10 min
at 20 º C

4 h+20 º C
45 min / +60 º C

R 320 - R 400

R 600 - R 1,000

Density of component A	1.4 - 1.5 kg / l at +20 ° C
Pot A + B	Around 2h
Color	gray, red-brown, black, white, yellow, beige
Consumption	1 liter / 6.0 m ^{2 with a layer thickness of 100 microns.}
Packaging	1l
Shelf	In the original sealed containers - 12 months (at between +5 º C to +30 º C) Producer is not responsible for the poor quality coatings in the case of the species we are not recommended hardeners and solvents.