Aerosol metalic autobase. It gives the covering original metalic effect.
Instruction for use:
- Prepare the surface for painting: clean, sand, degrease and prime if necessary.
- Shake spray can for at least 2-3 minutes.
- Perform a test spray.
- Hold the spray upright. Apply thin layer of paint from the distance 25-30 mm. If necessary apply next layer in 3-5 minutes.
- In case of partial use turn the spray can with the valve downwards and spray till discoloration of the stream. This will allow to use the aerosol several times.
Drying time: 10-15 minutes at temperature 15-25⁰С. Work should be carried out at a temperature of 15-25⁰С.
