CS System Acryl АК-2К-400

CS System Acryl АК-2К-400
Acryl enamel

Drscription

Top quality acryl enamel intended for professional car and commercial vehicles monochromatic painting. It is two-component system on the basis of hydroxyl-acrylic resin of own production. It is easy to use, durable and suitable for rapid application. Enamel is fast drying and can be applied in wide range of temperatures. It has perfect decorative properties, exceptional gloss, strength, elasticity and light fastness.

Suitable for applyin surface:

prepared old coatings;
primed and sanded surfaces.

Cautions:

Painting equipment and tools should not have traces of water. Do not paint over at relative air humidity above 80%;

Mixing proportions:

Hardener: 50%		Thinner: 10 - 15 %
CS System Hardener – 425	t. +18ºС to +25ºС	CS System Thinner – 410	t. +18ºС to +25ºС
CS System Hardener – 418	t. lower +18ºС	CS System Thinner – 405	t. lower +18ºС
CS System Hardener – 435	t. +25ºС to +35ºС	CS System Thinner – 415	t. +25ºС to +35ºС


Enamel – 100 Hardener – 50 Thinner – 10+15	Mix	18 – 22 sec. at +20ºС В3 – 4	1,3 – 1,6 mm 3 – 4 bar 2-3 layer 45 – 55 micron	10 – 15 min. at + 20ºС	8 h./+20ºС 45 min./+60ºС

Density	1.18 - 1.24 kg/l at +20°С
Pot life А+В	up to 8 h.
Solids content	50 – 64%
Gloss	more 90% at an angle 60°
Consumption	1 l per 10м² at 50 microns
Packaging	0,8 l, 20l
Lines storage	In the original closed container - 24 months (at a temperature from + 5ºС to + 30ºС)

Hhardeners and thinners for different conditions of application of acrylic enamel "CS System Acryl АК-2К-400"

Material type	Air temperature
Material type	lower + 18°С	from + 18 ° С to + 25 ° С	from + 25°С to + 35°С
Hardener	CS System Hardener – 418 fast	CS System Hardener – 425 standard	CS System Hardener – 435 slow
Thinner	CS System Thinner – 405 fast	CS System Thinner – 410 standard	CS System Thinner – 415 slow