CS System Clear Coat 830 HS

CS System Clear Coat 830 HS
Autoluck

Description

High solid, two-component acrylic top coat. It belongs to a two-component acrylic system. Clear coat perfectly fills the pores and small scratches, has a good luster and resistance to oil, gasoline and atmospheric influences, which helps to protect the surface.

Suitable for applying surface

Polyuethane and acryl top coats, metallic base

Mixing proportions:

CS System Clear Coat 830 HS - 100
Hardener "CS System Hardener 830 HS" or "CS System Hardener 835 HS" - 50
Thinner "CS System Thinner 405" or "CS System Thinner 410" or "CS System Thinner 415" - from 0 to 30

Cautions:

applied after drying the base enamel.
equipment and tools for the application must not have any trace of water.
Autoluck not apply when the relative humidity of the air is not higher than 80%.


Autoluck - 100 Hardener - 50 Solvent - 0 ÷ 30	Mix up	14 - 15 seconds at +20 º C B3 - 4	1,3 - 1,5 mm 3 - 4 bar 1.5 - 2 layers of 40 - 50 microns	5 - 15 min at 20 º C	9:00 / +20 º C 40 min / +60 º C

Autoluck - 100
Hardener - 50
Solvent - 0 ÷ 30

Mix up

14 - 15 seconds
at +20 º C
B3 - 4

1,3 - 1,5 mm
3 - 4 bar
1.5 - 2 layers of
40 - 50 microns

5 - 15 min
at 20 º C

9:00 / +20 º C
40 min / +60 º C

Density	1,0-1,05 kg/l at +20°C
Solids content in the mixture of paint and a hardener (A+B)	50-55%
Pot life	Equally 7 h.
Consumption	1 l per 8 m2 with dry film thickness 50 mm
Pachaging	1 l, 5 l
Shelf	In original sealed packaging 24 months at temperatures between +5 º C to +30 º C and relative humidity up to 80% Producer is not responsible for the poor quality coatings in the case of the species we are not recommended hardeners and solvents.