Thermoplastic for thick-layer flat linemarking with anti-skid effect
| PROPERTIES | Thermospray plastic is thermo softening material in the form of granular mixture of polymeric binder, mineral fillers, pigments, plasticizers, functional additivesm forming after heating, blending and cooling, the solid coating. |
| AREA OF APPLICATION |
It has been designed for permanent road markingon highways and streets covered with asphalt andconcrete with service life more than four years. |
| APPLICATION CONDITIONS |
It is applied with specialized road marking machinesfor application at material temperature between +190°С and 220°С by extrusion or screed box method. |
| CONSUMPTION |
4-6 kg/m2 at a full flat line thickness of 2-3 mm |
| CHARACTERISTICS |
Mechanically resilient, flexible, 100% adhesion to surface, free of solvents, UV, IR- resistant, fast curing, alkali-resistant, freeze resistant |
| COLOR |
White, yellow |
| DENSITY |
1,7-1,1 g/cm3 |
| SOLIDS CONTENT |
100% |
| HARDENING TIME |
up to 10 minutes at +20°С |
| APPLICATION METHOD |
Before applying remove the traces of the previousmarking. Surface must be clean, dry, free of dust, earth,mud, salt, oil and other dirt. On the concrete, apply aprimer Signakul PCP 01. Application temperature should be between 190°С anf +220°С. Environmental temperature at application must be between +5°С and +35°С. Substrate temperature must not be below 0°С and over +40°С. Environmental temperature at application must be Relative humidity must not exceed 85%. |
| PACKAGING |
Plastic bag -25 kg |
| STORAGE |
12 months if it is kept at a temperature of not higher than +30°С in originalsealed packaking, avoiding direct sunlight. |
| SAFETY |
When handling it is necessary to strictly follow safety procedures and fire protection measures which are contained in the standards and technical documentation of the product. |