Signakul CP 21-25

Print page

Two-component thin-layer coldspray plastic

PROPERTIES System (A+B) with mixing ratio 98% +2%, which components are supplied separately and mixed immediatelybefore application. The mixed components remain thixotropic fluid prior to application and then rapidly harden through chemical reaction which is strongly influenced by the air and temperature of the application surface.
AREA OF APPLICATION          
It has been designed for permanent road markingon highways and streets covered with asphalt andconcrete with service life more than two years. It is alsoapplied for renewal of old marking for all types of coldplastics.
APPLICATION CONDITIONS    
It is applied with specialized two-component markingmachines with airless spray system. Depending on theoutside temperature add 1 to 2% catalyst.
CONSUMPTION
1,5 kg/m2 at a layer thickness of 0,8 mm 
CHARACTERISTICS     
Mechanically resilient, flexible, 100% adhesion to surface, free of solvents, UV, IR- resistant, fast curing, alkali-resistant
COLOR
White 
SOLIDS CONTENT
>99%
HARDENING TIME
(A + B) with mixing ratio 98% + 2%, approx. 5 to 12 minutes at +20°С
APPLICATION METHOD
Before applying remove the traces of the previousmarking. Surface must be clean, dry, free of dust, earth,mud, salt, oil and other dirt. On the concrete, apply aprimer Signakul PCP 01. Environmental temperature at application must be between +5°С and +35°С. Substrate temperature must not be below 0°С and over +40°С. Environmental temperature at application must be Relative humidity must not exceed 85%.
PACKAGING
Metal can -30 kg, catalyst: powdered - 0,6 - 25 kg; liquid - 0,6 - 22,5 kg
STORAGE
12 months if it is kept at a temperature of at least +5°С and a maximum of +25°С in original sealed packaging.
SAFETY
When handling it is necessary to strictly follow safety procedures and fire protection measures which are contained in the standards and technical documentation of the product.

Order a product