Acrylic paint for thin-layer horizontal road markings
| PROPERTIES | One component acrylic air drying paint with high dry residue and low content of organic solvents. |
| AREA OF APPLICATION |
It has been designed for permanent road markingon highways and streets covered with asphalt andconcrete with service life more than six months. It isalso applied for renewal of old marking. |
| APPLICATION CONDITIONS |
It can be applied manually and with special machineswith airless and air spraying systems |
| CONSUMPTION |
0,65 and 1,0 kg/m2 |
| CHARACTERISTICS |
High abrasion resistance, flexible, 100% adhesion to surface, UV, IR- resistant, alkali-resistant, High dry residue |
| COLOR |
White, yellow, red, black |
| DENSITY |
within 1,61-1,7 g/cm3 |
| SOLIDS CONTENT |
>78% |
| HARDENING TIME |
between 12 and 25 minutes at +20°С
|
| APPLICATION METHOD |
Before application surface must be clean, dry, free ofdust, earth, mud, salt, oil and other dirt. Environmental temperature at application must be between +5°С and +35°С. Temperature of the application surface must not be below 0°С and over +40°С. Relative humidity must not exceed 85%. |
| PACKAGING |
Metal can -30 kg |
| STORAGE |
12 months if it is kept at a temperature of at least +5°С and a maximum of +25°С in original sealed packaging. |
| SAFETY |
When handling it is necessary to strictly follow safety procedures and fire protection measures which are contained in the standards and technicaldocumentation of the product. |